Light board for bike rack

With Zero Maintenance Required. Free Delivery On Selected Items. Residential Settings. Discounts Available On Bulk Buys!

Halfords Cycle Carrier Lighting Board The Halfords Cycle Carrier Lighting Board is used when you are carrying a rear mounted cycle carrier and your rear lights are covered. Designed for attaching your car number plate and guaranteeing visibility when transporting your bicycles on a tow ball-mounted bike rack. Complete, ready to use. Fitted by using straps for all other bike racks.

The car needs to have either a 7-pin or a 13-pin electric outlet to connect the light board to the car. Fitting a lighting board to a towbar-mounted cycle rack is straightforward as the towbar will also feature an electrics socket into which the lighting board is plugged into. The lighting board is then securely attached to the rack or the cycles by means of a strap, and you are ready to drive away - legally.

Any bike carrying system involves a degree of compromise. If you need a lighting board I think you would be just as well with a towbar, fitting a lighting socket is more or less halfway there. We had an Fiesta and fitted a towbar to tow a small trailer with camping gear.

It also meant we could use a lighting board with the bikes. The board is made of hollow extruded plastic so it’ll be easy enough to get some holes through it. Many More Barriers Online. It is lightweight and plastic, so does not feel that sturdy and certainly seems expensive for what it is. Here you will find a range of accessories including wall hangers and storage, frame adapters (cross-bars), lighting boards and adapters, front wheel carriers, locks, straps and more.

If your bike has a luggage rack , you may be able to fit a rear light in arguably the best place for it. Bike carrier accessories. Not all racks have suitable mounting holes.

Check Out Top Brands on eBay. Find Great Deals now! Easily fitted to the bike carrier or outer bike using included straps. Thule 9Lightboard.

An additional rear lamp capable of showing red light to the rear and a red reflecting device, both of which are visible from a reasonable distance, shall be fitted to the vehicle or the load in. Before you buy a car rack you should determine if you need to fit a light board to your car. Your number plate and rear lights have to be visible from all angles at all times.

The easiest way to do this is by fitting a light board. Entry level racks should cost from about £but depending upon your vehicle, you may need to spend more. If the rack and bikes obscure your lights, you will also need an auxilliary lighting board and towing electrics adding to your car which as a DIY job would add around £(board and electrics kit). The bigger, brighter brother to PlateMate is here! Hold your number plate safe and sound to the back of your bike rack or mounted bike , with.

The Fabbri Alu-Telescopic Lightboard Deluxe is an all aluminium construction with telescopic trombone side arms. It’s easy to fit and slide in your number plate. If in doubt about which one to buy we recommend a Saris Bones. Rack Ideate that is gold! And remember, if the rack covers your lights and number plate, you’ll need to attach a lighting board.

For peace of min all our roof mounted bike racks are lockable. Money Back Guarantee!