Injector removal tool

Genuine Renault Trafic M9R 2. Engine specific tool kits and universal tool kits, which can be used manually or hydraulically. R renault kit for hydraulic injector puller. It happens again and again that when removing injectors from the cylinder hea increased tensile force is necessary. The cause of this seizing in the cylinder head is usually a combination of windscreen washer flui dirt, fumes, burnt sealing rings or electrochemical corrosion etc.

In this chapter you will find numerous tools for a professional solution.

Manufactured from Chrome Vanadium and S45C, this set. Price for standard removal of first injector if not snap - £100. If injector snap we can remove the rest of it from cylinder head for extra payment - another £100. No one honestly can) We do have a very high and proven success rate. Quality Assurance: OGS Mechanics will never compromise on quality and all our injector technicians are experienced and use the latest hydraulic injector puller tools to ensure our workmanship on your vehicle is completed to the highest possible standard.

We share this data with analytics partners to help us understand how the site is used. The pictures on the right demonstrate why these injectors can be so difficult to remove! We use specialist tools from Pichler to make sure the injectors can be remove with a limit of tons pulling power we have never failed.

Over the years we have worked on many seized injectors because of poor manufacturer design, seal failure, normal wear and corrosion, or due to attempted removal by someone else. If your diesel fuel system requires maintenance including injector removal , then specialist equipment and technicians are required. With the injector you wish to remove on show you will need to assemble the removal tool. Removal tool (required required) as above.

Specialists in seized injector removals. Keep your pumps, filters and injectors in perfect condition with fuel and injector tools from Euro Car Parts. Browse our range today, and enjoy low prices on any of our 130car parts when you shop online or in store. Start the engine and warm it up for minutes.

Turn the engine off. Thread the injector puller tool onto the top. The puller legs align around the injector base and the collar is slid down to firmly grip the injector. Removes fuel injectors from engine. A slide hammer attaches to the puller, which is used to pull the injector from its seat.

We remove seized and broken diesel injectors and glow plugs. Currently we have a 1 success rate! Subsequently remove the injector using the hydraulic injector removal tool or the 8kg slide hammer. Removing the injector from the cylinder head (Siemens injector ) 1.

We promise to be the most efficient and reliable fuel injector removal service in London and surrounding areas, going the extra mile for emergency injector removal. Designed to remove the copper injector seal when it has stuck into the head. Adjusts to allow seals with 6. Simply drop the tool into the hole left by the injector , tighten the handle and lift out the seal.

For removing stuck and the seized common-rail landrover specialist tools, hub nut, injector puller, pulley and a few others condition is used. The injector puller have been used but are in pristine condition. From a smoking-free and pet-free home.

Any questions, please ask. Tools Parts Categories.