Powrtouch motor mover problems

If there is not sufficient pressure in the tyre the drive roller on the motor mover may slip. Yours might have more room. Some of the most common problems include issues with reset buttons, and also issues that are caused by the battery not being in top condition.

I had a repeated problem with the actuation motors failing. Is the remote not syncing with the mover ?

Watch, as I explain. Powrtouch caravan movers are the UK leading caravan motor movers. Not good enough in my view for driving a couple of (what are in effect) starter motors. Won it for £5from a dealer on eBay. When you press the control the caravan mover will either, start then stop, or run then stop then runs again and will.

A ticking noise coming from the rollers is nothing to worry about and is only a little bit of play between the. The mover works when not engaged but refuses to move the. With the exception of the electronic control unit (which should be kept nice and dry inside the caravan), the caravan motor mover is a relatively simple and robust piece of kit, but because most of the moving parts are in the firing line from the road wheels (and that applies whether the mover is fitted in front of or behind the axle), a bit of maintenance every now and then won’t go amiss.

Please note that instructions on this section of the web site are the latest issues only. Backed by their no-quibble year guarantee, customers have the peace of mind that they are buying a quality product. To have the electric actuator replaced with a manual actuator (2) To have an engineer to replace both actuator motors and full check over the mover to check for any underlying. A new one arrived Wednesday and I fitted it - the system now works satisfactorily. You must or register to reply here.

Can anyone advise me if they have had any adverse problems whilst using this motor mover as apposed to other movers on the market? The red and green lights are on the conrol box but when I press the two buttons on the handset I get nothing i. I have charged the leisure battery but this has made no difference. Click on the shopping basket next to the relevant repair price. Follow the checkout instructions - Although it will direct you to a Paypal site, you have the option of paying with a credit card on the webpage. So take a look at our latest video to find out more and to make sure you get the most out of your caravan mover for many years to come.

You can put your caravan down your driveway or in your storage location nose first which is an added deterrent to deter people from stealing your caravan. CJ: So Richar you fit these movers for a living, what is it that people say they like about them? Motor movers require 12V electricity from a caravan’s leisure battery to power the rollers. Never use a mover with the caravan’s electrics connected to the mains or campsite hook-up, as this will damage the system.

Where does a motor mover go on the caravan? Traditional motor movers are bolted to the caravan’s chassis next to the wheel(s).

That did not work last night. The brushless motor drives the spur gear via the motor electronics. The spur gear transfers the movement to the drive roller via sprockets. The drive rollers are swung onto the tyres by remote control and the caravan can be moved. As soon as the remote control is release the Mover is slowed down via the safety brake.

He will also be showing you how to fit the. I’ve watched pro technicians experience fitting problems in the past, but Kim sussed it all first time, partly due, no doubt, to the excellent instructions and care taken throughout the process. What Kim says about the E-go Titanium motor mover : “Everything’s here, even spacers for positioning the mover the correct distance from the tyre.

We recently returned from holiday to find that one side of our PowrTouch Evolution was not engaging onto the tyre. There is a quick procedure to follow if yo. Run the motor mover forwards and backwards (without actually engaging it to the wheel) whilst spraying at the ends of the roller.

The idea is to flush out accumulated dirt and grit from the very simple bearings. What I really need however is a motor mover that is up and ready to do its job when I need it. I have to say, when we had a problem with our PowrTouch mover , they sent one of their engineers to the site we were staying on to fix it (we did have it fitted by their engineer though). We were very happy with their service. Yes, all PowrTouch movers can be removed from your old caravan and transferred to your new one.

You cannot swap a single axle model to a twin axle caravan and vice versa. If the caravans have different chassis you may need different brackets. Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on.