Thursday, 18 June 2020

Show me tell me questions

About the questions. You’ll be asked vehicle safety. Get the best questions and about ‘ show me tell me ’ here.


These The ‘ show me , tell me ’ vehicle safety questions that driving examiners can ask in car driving tests. Tell me how you’d check that the brakes are working before starting a journey.

Brakes should not feel spongy or slack. Vehicle should not pull to one side. How many questions can you ask on the test? How to tell me what to tell me?


What questions are asked during a car driving test? Official DVSA guide to the driving test ‘ tell me ’ questions (where you explain how you’d carry out a safety task) at the start of your test. They should not feel spongy or slack and the vehicle should not pull to one side.

If you give the wrong answer for one or both questions , you’ll be marked with one driving fault. This will be at the start of the driving test from a possible questions. You will need to answer one of each. Show Me , Tell Me quiz. Your examiner will ask you the ‘Tell Me’ question at the start of the.


These are questions that are asked at the start of the test, before you begin driving, and test your knowledge of how a car actually works. Part of the practical driving test is a series of questions designed to show you know a bit about car maintenance and controls. Tell me where you’d find the information for the recommended tyre pressure for this car and how tyre pressure should be checked. You won’t fail your driving test if you answer any of one question wrong but you will get a minor driving fault. We prepare the same mock for show me tell me questions.


Each question have four however you need to choose one right answer. Below are all the DVSA driving practical driving test questions and. The “tell me” question is done at the start of your test before you start driving. The “show me” question is done while you are driving.


If you get either or both questions wrong you usually just get minor fault but it is possible to fail the test on this section if you lose control of the car while operating the controls. Each scenario is meant to mirror real life.

Five top tips for driving test ‘show me, tell me’ questions 1. Tell me’ questions are ones where you must explain what you would do, NOT to act it out as in the ‘show me’. Answer any of these two questions incorrectly and you will gain one driving test fault. Practice makes perfect, so get plenty of practice from a Approved Driving Instructor. Open the bonnet, identify where you would check the engine coolant level and tell me how you would check the engine has the correct level.


If the coolant is below the min mark then more coolant will need to be added. The Official DVSA ‘show me’ questions video. All notes should deal with the demands of the official DVLA standards. I have split the questions into parts to make it easier for revision purposes, but in the test these parts may be combined! Learn with flashcards, games, and more — for free.


There are two type of questions. Tell me questions where you just actually explain the examiner what you gonna do. Car ‘show me, tell me’ vehicle safety questions 1. The driving test examiner will ask you two questions at the start of your practical test, one show me and one tell me from a list of questions.


You don’t need to exit the vehicle. Explain you’d operate the switch (turn on ignition if necessary), and then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights). No need to exit vehicle). Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on.


As this is a ‘ tell me ’ question, there is no need to physically check the lights. Warning light should illuminate if there is a fault with the anti lock braking system.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.